-
June 8, 2023
How is Microlit E-Burette better than a Digital Burette?
What is a Burette? A burette is a laboratory equipment commonly used to carry out a titration. A titration is a technique where a solution of a known concentration (titrant) is used to determine the unknown concentration of a second solution (analyte). A visual indicator usually signals the completion or the end-point of the experiment. Two types of burettes that are commonly available and widely used include glass burettes and digital burettes. Before we discuss how electronic burettes or E-Burettes are better than...
Read More -
May 23, 2023
How does an autoclave work for Lab instruments?
What is an autoclave? An autoclave is a machine used to carry out industrial and scientific processes requiring elevated temperature and pressure in relation to ambient pressure and/or temperature. Autoclaves are used before surgical procedures to perform sterilization and in the chemical industry to cure coatings and vulcanize rubber and for hydrothermal synthesis. Industrial autoclaves are used in industrial applications, especially in the manufacturing of composites. Many autoclaves are used to sterilize equipment and supplies by subjecting them to pressurized...
Read More -
April 20, 2023
Guidelines for Cleaning and Maintenance of any Bottle Top Dispenser
Bottle Top Dispensers are used with various reagents sometimes with very aggressive chemicals. The residue of any chemical can impact results in a new analysis. Therefore, it is very important to clean bottle top dispensers after use or before using any fresh chemical/solvent/reagent. Furthermore, some chemicals tend to form crystals on the inside of the dispenser that hinders piston movement and liquid dispensing. So, regular cleaning is mandatory to keep crystals from forming and maintain the long life of the...
Read More -
March 29, 2023
How to avoid the most common pipetting errors?
As lab technicians, one can’t deny that mistakes happen due to human error, broken machinery, environmental conditions, fatigue and the list goes on. One should address all contributors and minimize pipetting errors from a broad approach, of standardized pipette calibration or pipette repair services, pipette training and incorporating the use of high-quality, comfortable pipette equipment. The following is the list of 10 routine steps, Lab technicians and analyst takes to prevent pipetting errors during experimentation. One can avoid pipetting errors...
Read More -
March 21, 2023
A Quick Guide to Lab Equipment Decontamination
Decontamination is a term used to describe a process or treatment that renders a medical device, instrument or environmental surface safe to handle. Sterilization, disinfection and cleaning are all forms of decontamination. All infectious materials and all contaminated equipment or apparatus should be decontaminated before being washed, stored or discarded. Autoclaving is the preferred method. Each individual working with biohazardous material should be responsible for its proper handling. Lab equipment decontamination is incredibly important. After the COVID-19 pandemic, it’s more...
Read More -
March 17, 2023
Dr Kavita discusses about Good Lab Practices, Importance of Pathology and Impact of Digitalization on Medical Pathology and much more
Team Microlit had the chance to interact with Dr Kavita Somani, Founder and Director as well as the Chief Consultant and Lab Director at Apollomedics Hospital, Lucknow (UP). We asked her several questions during our interaction regarding her role, milestone projects and her rich experience in the healthcare sector. Apollo Hospitals was established in 1983 by Dr Prathap C Reddy, renowned as the architect of modern healthcare in India. As the nation’s first corporate hospital, Apollo Hospitals is acclaimed for...
Read More -
March 1, 2023
LENTUS Product Guide
What is LENTUSTM Bottle Top Dispenser? A high-precision liquid handling tool, the Microlit LENTUSTM is engineered with perfection to be used with highly corrosive acids like Hydrofluoric acid, Nitric acid, Sulfuric acid and many others. This Bottle Top Dispenser is mainly used for handling and dispensing high-purity media along with acids and bases. While conducting experiments, this Bottle Top Dispenser exhibits top-notch chemical compatibility and gives accurate results. Not just hydrofluoric acid, it works well with other chemicals and reagents...
Read More -
February 20, 2023
Why Data Security Is Vital for Laboratories?
At the core of any scientific organization—from pharmaceutical manufacturers to academic research labs—is data. Laboratory leaders use diverse sets of data on a daily basis, from data generated by basic research experiments to analyzing financial data to make informed business decisions. Regardless of the type of data being produced and analyzed in a lab, it must be trustworthy and accurate. Ensuring data integrity and security promotes a positive lab culture, protects the lab’s reputation, and drives business growth. Every laboratory...
Read More -
February 9, 2023
How is patented UniCal technology beneficial in micropipettes?
Introduction about UniCalTM technology Microlit’s newest launch and India Design Mark 2021 awardee “NERO micropipette” has been granted the patent for its unique calibration system, the UniCalTM technology that allows quick in-lab calibration in a single operation without disengaging the digits from the plunger mechanism. *Patent Number is 405607 What is UniCalTM Technology? A micropipette is a device that is used in conjunction with a tip to transfer an adjustable volume of liquid (usually in micro-litres) from one location to...
Read More -
January 23, 2023
Difference between a regular Bottle Top Dispenser & HF Dispenser
What is a regular Bottle Top Dispenser? Bottle Top Dispenser is crucial liquid handling equipment used by researchers and scientists in laboratories. It can measure solvents, chemicals, reagents, oil, and so on from several containers, which otherwise becomes a tedious and impractical task. So, to multiply lab safety and prevent any hazardous activities, the Bottle Top Dispenser is vital for carrying out tasks easily and precisely without harming the laboratory environment. Besides ensuring safety in the laboratory, the bottle top...
Read More -
November 24, 2022
Microlit products have simplified KDDL’s daily procedures to provide good finishing to the watches
Established in 1981, KDDL formerly known as Kamla Dials and Devices Limited is one of India's leading manufacturing company of watch components. The company conducts its operations with maximum precision to manufacture high-quality watch and other accessories. We had the pleasure of having a one-on-one conversation with Suresh Kumar, the Purchase Manager at KDDL, Bangalore. We talked to him about his role and responsibilities at KDDL, the various Microlit products KDDL used on regular basis and his overall experience with...
Read More -
November 11, 2022
Top 5 Healthcare Policies in US and India
Healthcare policies refer to goals, decisions, and actions for administering and accessing healthcare, including the cost of treatment and insurance coverage. What is Healthcare Policy? Healthcare policy is an integral aspect of the healthcare system—one that helps shape and protect the health and well-being of our population. Policy impacts issues as fundamental as healthcare access, cost, delivery methods, and privacy. It involves the rules and regulations set forth by lawmakers on a local, state and national level. Importance of Healthcare...
Read More -
October 27, 2022
Why do Labs need Bottle Top Dispensers?
Laboratories contain many corrosive and robust chemicals that require proper handling for their usage. They must be dispensed, used, and disposed of appropriately to avoid untoward incidents. Bottle top dispensers ensure precision and accuracy in the labs. This blog explains bottle top dispensers and why they are needed in the labs and gives a step-by-step guide to choosing the right bottle top dispenser. What is a Bottle Top Dispenser? A bottle top dispenser is a common lab instrument which is...
Read More -
September 30, 2022
9 Advantages of a Point-Of-Care System
Introduction to the Point-of-Care System The healthcare industry is witnessing massive changes at the moment. The advancing technology is majorly focused on creating better treatments and improving patient outcomes. After going through an unexpected evolution, the industry has changed for the better. From the intervention used to gadgets, all are backed by significant research and technologies. One such technology that revamped the healthcare industry in the past few years is the concept of the point-of-care system, better known as point-of-care...
Read More -
September 21, 2022
How can you improve Pipetting Accuracy?
Working with pipettes and micropipettes is a core job for scientists/researchers/lab experts. No matter how amazing their hands might be, they aren’t nimble enough to properly handle the minuscule portions of liquids that need to be fed into test tubes. This is the reason scientists prefer using pipettes to transfer samples instead of traditional method of pouring them out by hand. As laboratory’s demand for accuracy and precision grows, so does the importance of understanding and developing an optimal pipetting...
Read More -
September 2, 2022
What are the hazards of HF and other glass-attacking reagents?
What is hydrogen fluoride? Hydrogen fluoride is a chemical compound that contains fluorine. It can exist as a colorless gas or as a fuming liquid, or it can be dissolved in water. When hydrogen fluoride is dissolved in water, it may be called hydrofluoric acid. Hydrogen fluoride can be released when other fluoride-containing compounds such as ammonium fluoride are combined with water. How could you be exposed to hydrogen fluoride? [caption id="attachment_3513" align="alignright" width="206"] The aqueous solution of HF have...
Read More -
August 19, 2022
How India scaled up its COVID-19 Laboratory Testing Capacity
India has been facing pandemic situations since ages. In 1817, it first experienced Cholera pandemic followed by Flu, Smallpox, Plague and many more. In 2020, it experienced the devastating situation of COVID-19. India has always tried to upgrade its techniques and methodology according to the needed requirements. Laboratory testing methods have been one of them. India has been calibrating its testing strategy as per the changing paradigm and taking into account the scope, need and capacity to rapidly scale-up tests...
Read More -
August 10, 2022
E-Burette Product Guide
What is a Burette? Burette is an essential laboratory instrument, commonly used in the titration process for quantitative analysis in many industrial chemical tests where solutions of known concentration are used to find the concentration of unknown solutions. Types of Burette There are three types of burette: 1. Volumetric Burette A volumetric burette is made of glass or plastic material, with a volume scale printed on the burette wall. It has a stopcock at the end of the instrument and...
Read More -
July 15, 2022
Calibration Made Easy with the New Microlit NERO micropipettes
Micropipettes are quite ubiquitous instruments. They’re used in labs to transfer small quantities of liquid, usually down to 0.1 μL. We’re glad to share that the newest member of our growing product portfolio, MICROLIT NERO, a range of ergonomic micropipettes with advanced technologies like UniCal™ and μAir™, that ensure high precision in practical laboratory environments. It has been built by our in-house team of product design engineers. It is available in Single Channel Fixed Volume and Variable Volume models. They...
Read More -
June 17, 2022
A Look into the Future: What will Laboratory Industry look like in the next 10 years?
Trends and developments in the laboratory instruments industry have been changing rapidly over the past several years. With the tremendous growth in clinical research activities and scientific and technological advancements, every industry across the globe is demanding new and innovative laboratory products. New technologies and products are being launched in the market at a speedy pace. The increasing demand from the pharmaceutical, biotechnology and life science industries is fuelling the growth of this industry. The future role of laboratories will...
Read More -
June 4, 2022
Pipetting Small Volumes: 8 Tips to Improve your Technique
Have you ever meticulously planned your workflow, only to find that your results have too much variance, forcing you to redo your experiment? As modern researchers increasingly work with high-value small volume samples, the need for advanced pipetting techniques/protocols is evident. In order to detect microscopic changes accurately in small sample volumes, test tubes and vials are being gradually replaced by microplates, which require reagents in the microliter/nanoliter range. While working with small volumes, factors such as temperature and dispensing...
Read More -
May 23, 2022
How to remove air bubbles from any liquid handling instrument?
Introduction to air bubbles in liquid handling devices Air bubbles are among the most recurring issues in liquid handling instruments. Various types of liquid handling instruments include a variety of automated robotic systems like digital/electronic pipette, micropipette with fixed or disposable tips, microplate/microtiter plate, dispensers, stackers, handlers, washers, etc and because of the micrometric dimensions of the tubes and channels of these devices, air bubbles can be very difficult to remove and be detrimental to the experiment being conducted. Removing...
Read More -
May 9, 2022
An Advanced Guide to Titration
What is a Titration? Titration is a method commonly used in a laboratory which uses a solution of a known concentration to analyse and determine the known concentration of another solution. Typically, the titrant (the known solution) is added from a burette to the known quantity of the analyte (the unknown solution) until the reaction is complete. Often, an indicator is used to usually signal the end of the reaction, the endpoint. Types of Titration There are several types of...
Read More -
April 26, 2022
An Advanced Guide : Micropipette
What is a micropipette? A micropipette is a common yet an essential laboratory instrument used to accurately and precisely transfer volumes of liquid in the microliter range. Micropipettes are available in single-channel and multi-channel variants. While the single-channel micropipettes are used in labs that perform research related to molecular biology, microbiology, immunology, cell culture, analytical chemistry, biochemistry and genetics, the multichannel micropipettes are recommended for ELISA (diagnostic test), molecular screening, kinetic studies and DNA amplification. Types of micropipette Micropipettes can...
Read More -
April 21, 2022
Pipet vs Pipette vs Micropipette: Is there any difference?
What is a pipet? A narrow, usually calibrated tube into which small amounts of liquid are suctioned for transfer or measurement. It is a measuring instrument that consists of a graduated glass tube used to measure or transfer precise volumes of a liquid by drawing the liquid up into the tube. What is a pipette? A pipette (sometimes spelt as pipet) is a laboratory tool commonly used in chemistry, biology and medicine to transport a measured volume of liquid, The...
Read More -
April 4, 2022
8 Prominent Artificial Intelligence Research Centers in Latin America
What is Artificial Intelligence (AI)? In 1956, the term Artificial Intelligence was defined by John McCarthy. He defined AI as ‘The science and engineering of making intelligent machines.’ Artificial Intelligence can also be defined as the development of computer systems that are capable of performing tasks that require human intelligence, such as decision making, object detection, solving complex problems and so on. AI has accomplished this in the recent past by developing machines and robots used in various fields, including...
Read More -
March 31, 2022
Microlit’s Beatus BTD and RBO micropipettes help in soil analysis and related research at ICAR-DWR (Directorate of Weed Research), Jabalpur
We had the pleasure of conversation with Mr Dibakar Roy, the Soil Scientist at ICAR-DWR (Directorate of Weed Research), Jabalpur. Our interaction covers details about his work at ICAR-DWR, the Microlit products they use to execute various soil analysis and related research and his overall experience with our products. Directorate of Weed Research, Jabalpur; a research Institute under the Indian Council of Agricultural Research (ICAR) provides scientific research and various weed management technology to minimize the yield damage through weeds...
Read More -
March 14, 2022
Significance of various Liquid Handling Instruments in Wine Industry
Overview of Wine Industry and its Importance The global wine industry successfully generates annual revenue of $29 billion and is standing at the point of inflection. The wine industry is connected to images of bucolic landscapes and slow life; however, it is emerging as a significant business sector that is growing at a fast pace. The wine market is projected to register a CAGR of 4.28% during the forecast period, 2021- 2026. COVID-19 made a major impact on the wine...
Read More -
February 21, 2022
Mr Deepak Singh shares details about crucial role of Quality Assurance and Quality Control in reducing error margins and streamlining processes at SLMG Beverages
Team Microlit had the chance to interact with Mr Deepak Singh, Quality Control Manager at SLMG Beverages Pvt. Ltd. (Coca-Cola), Lucknow (UP). We asked him several questions during our interaction regarding his role, milestone projects, CSR initiatives and his rich experience at SLMG Beverages. SLMG Beverages is one of India’s leading beverage companies that has been closely associated with Coca-Cola for over 30 years now. With over 1.5 million outlets, a network of 1500+ distributors, 25+ transporters and 30+ warehouses,...
Read More -
February 15, 2022
Tests & Procedures conducted in QC Labs of Paint, Cement & Agrochemical Industries
What happens in Quality Control Labs? Quality control is a procedure/set of procedures carried out to ensure that a manufactured product/performed service adheres to a defined set of criteria/standard values (before, during and after manufacturing) to ensure customer satisfaction and conformance with statutory regulations. The raw materials, manufacturing process and finished products undergo stringent QC checks. Laboratory quality control refers to the measures taken for maintaining the correctness, consistency and timeliness of lab findings by ensuring the early detection of...
Read More -
January 28, 2022
Ground breaking Research Projects undertaken by 10 renowned Medical Institutes of India
In a developing and highly populated country like India, medical professionals often find themselves short-handed, leading to difficulties in catering to medical needs of each and every individual. However, medical institutes in India have taken the responsibility of churning out qualified and well-trained professionals that can facilitate the treatment of patients with various diseases. Medical colleges are the heart of medical research in India. In today’s era, the importance of medical research cannot be overemphasized. The goal of medical research...
Read More -
January 12, 2022
A Step-by-Step Guide to Use Bottle Top Dispensers
Bottle Top Dispensers – A necessary safety lab equipment A bottle top dispenser is a common lab instrument which is used to dispense precise amounts of chemicals/reagents, organic and inorganic solvents, oils etc. from bottles or other containers. The process of dispensing manually poses several risks such as spilling of chemicals, inaccurate measurements and even fatal lab accidents. In order to prevent such hazards and enhance lab safety, Bottle Top Dispensers are the go-to scientific apparatus for dispensing reagents safely and precisely...
Read More -
December 13, 2021
Why are Vaccines Important and Needed for Immunization in Today’s World
What are Vaccines? A vaccine is a protective layer administered to reduce the risk of infections posed by several life-threatening diseases. It is also called immunization because when a dose of vaccine is pumped into the human blood cells, it complements our natural immune system and responds accordingly. Immunization is a key component of primary health care and is one of the best health investments money can buy. The World Health Organisation confirms that we have vaccines to treat more...
Read More -
November 24, 2021
10 Most Common Diagnostic Tests You Must Know
What are Diagnostic Tests? A diagnostic test is a standard test designed to identify the cause behind the prevailing symptoms of the disease. This test may also be used for various purposes, such as identifying strengths and weaknesses. For instance, if anyone faces difficulty hearing or reading, they may undergo diagnostic tests to determine the cause. Types of Diagnostic Tests There are various types of diagnostic tests. Some of them are: Biopsy Colonoscopy CT scan CT scans and radiation exposure...
Read More -
November 10, 2021
Everything you need to know about Rapid Test Kits
What are Rapid Testing Kits? They are used for a preliminary screening test and are useful in resource-limited settings. These kits help detect and monitor the underlying diseases in living organisms and measure the concentration percentage in non-living edibles, such as beverages, water and dairy products. Rapid test kits have proven their worth and saves money and time. Various Types Of Rapid Test Kits Available In The Market There are various types of Rapid Test kits available in the market to serve...
Read More -
October 29, 2021
How to Secure NABL Accreditation for Laboratories in India?
About NABL National Accreditation Board for Testing and Calibration Laboratories, popularly known as NABL, is a constituent Board of Quality Council of India (QCI). QCI is a registered society under the Societies Registration Act, 1860. Department for Promotion of Industry and Internal Trade, Ministry of Commerce and Industry, Government of India is the nodal Department for QCI. NABL has been established with the objective of providing Government, Industry Associations and Industry in general with a scheme of Conformity Assessment Body’s...
Read More -
October 25, 2021
Dispensing blood samples and biochemistry reagents made easy at CGHS, Mumbai
About Central Government Health Scheme (CGHS) CGHS operates under the Ministry of Health and Family Welfare. It was established in 1954 to provide comprehensive medical facilities to central government employees, both serving as well as pensioners and their dependent family members. The Scheme also provides services to members and former members of parliament, Supreme Court and High Court judges, freedom fighters, former Governors and former Vice-Presidents of India. Team Microlit : Please give us a brief about your role at...
Read More -
October 8, 2021
Do you know about these 6 famous environmental testing labs of India?
Introduction “Environmental testing is a process of measuring the equipment performance under specific environmental conditions.” Expert researchers primarily conduct environmental testing to evaluate the environmental conditions and suggest preventive measures for maintaining overall productivity. These conditions can include: Extremely low or high temperature Excessive sand and dust Regular variations in the temperature Excessively high or low humidity Glaciers and icing Presence of corrosive acids, including hydrofluoric acid Solar radiations These environmental conditions play an inseparable role in any environmental test....
Read More -
September 20, 2021
All You Should Know About Cell Culture
New to cell culture? Below, we have covered the basic overview of cell culture for you. So without any further ado, let’s dive into the blog. What is Cell Culture? Cell culture is a hundred-year-old technique that has created history by contributing tremendously to the world of science. Lab technologist working in a biosafety cabinet room Cell culture primarily refers to removing cells from plants or animals and subsequent cultivation in a self-grown environment for various scientific research. This technique...
Read More -
September 13, 2021
Industrial Applications of Hydrofluoric Acid
Hydrofluoric acid is the liquid form of hydrogen fluoride (HF), a fluorine containing compound. When the compound dissolves in water, it gives a colorless liquid called hydrofluoric acid. Hydrofluoric acid has a pungent smell and its contact with the skin can result in skin burn, redness and even skin breakdown. If HF is not readily neutralized, it might result in limb loss or even death. A workplace or lab hazard may occur if hydrofluoric acid is not dispensed safely. The...
Read More -
August 17, 2021
Understanding ELISA Test Basics and How Micropipettes Can be Handy While Performing These Tests
What is an ELISA test? The Enzyme-Linked Immunosorbent Assay (ELISA) technique uses an enzyme to discover the presence of a specific protein also known as target protein in a given medium, usually blood or serum. If the presence of protein is detected, then ELISA can determine the quantity of the same protein too. These tests are usually performed to detect antibodies in samples which are usually related to infectious conditions related to bacteria or viruses like HIV and Syphilis to...
Read More -
July 25, 2021
Mr Radjagobal on Ensuring Quality Excellence at Aurobindo Pharma
We interacted with Mr Radjagobal Radakichenane, Dy. General Manager, Corporate Quality Assurance, Formulations at Aurobindo Pharma for an engaging conversation around his role & responsibilities, the milestone projects of his career and his rich experience in the pharma industry. Established in 1986, Aurobindo Pharma is one of India’s top pharma companies. It was founded with the vision and the aim to become the most valued pharma partner to the world pharma fraternity. The company commenced operations in 1988-89 with a...
Read More -
June 23, 2021
Chemical dispensing made easier in the gold refining process at Ditasi, Sudan
About Ditasi for Investment Co. Ltd. Ditasi for Investment Co. Ltd. is located in the Northern state of Sudan. The company owns and manages mines and undertakes the extraction of gold and other minerals. The extracted gold is transformed into a mineralised form that serves economic benefits. The methods primarily used by the company for extraction include Heap Leaching and Carbon in Column (CIC) using Sodium Cyanide. Microlit’s Association with Ditasi for Investment Co. Ltd. Ditasi has been a Microlit...
Read More -
June 9, 2021
Facilitating Quality Assurance at Gyan Dairy, Lucknow
About Gyan Dairy Established in the year 2007, Gyan Dairy is a unit of CP Milk & Foods Pvt Ltd. Under the leadership of Mr C. P. Agarwal, Gyan Dairy started as a small dairy outlet in Lucknow with two products in its portfolio – Gyan Skimmed Milk Powder and Gyan Desi Ghee. With its growing popularity and acceptance from the customers, Gyan Dairy expanded its product range and its reach in Uttar Pradesh. Today, it sells 17 products, delivering...
Read More -
June 4, 2021
Decoding FDA 21 CFR Part 11 Compliance
We’ve always upheld the importance of maintaining the validity, reliability and authenticity of the experiments conducted with our high precision liquid handling equipment. In line with this thinking and after an intensive 12-month-R&D, we’re glad to present the all-new Microlit E-Burette Software developed in compliance with FDA 21 CFR Part 11. Considering the growing shift to digital record-keeping, the FDA (Food and Drug Administration, USA) introduced 21 CFR Part 11 (Code of Federal Regulations) in 1997 outlining guidelines on the usage of electronic...
Read More -
Preanalytical Automation in the Clinical Lab
A clinical lab plays an instrumental role in providing healthcare services to patients. Doctors rely on accurate lab results of patients to correctly diagnose them and treat them accordingly. The blood testing process or the Total Testing Process, is divided into 3 phases – Preanalytical, Analytical and Postanalytical. The preanalytical phase comprises test selection, patient and specimen identification, collection of sample, handling of sample, sorting out, pipetting and finally, centrifugation. Preanalytical Phase – An Error Prone Phase A tedious phase,...
Read More -
Advances in Field Instrumentation – Making Environmental Testing Efficient
Our environment has undergone noticeable changes in the past few decades. Today, issues such as water & soil contamination are one of the biggest grievances for the governments of the world and the common man. To ensure that there is no drastic change happening and track the shifting environmental quality, scientists are keeping a close check. To get an accurate reading of the current conditions, they monitor air, water and soil with dependable instruments. These instruments are used in fields...
Read More -
April 12, 2021
Filling tube loose or damaged
Burettes are used as a laboratory apparatus for titration where a solution of known concentration is used to determine the concentration of an unknown solution. In the process of titration, the completion of the operation is referred to as the end-point which is the precise point where the chemical reaction is complete. As the end-point is crucial while performing a titration experiment, it is important to use a burette which helps in obtaining a highly accurate end-point. Microlit E-Burette ...
Read More -
Enhancing Accuracy with the New and Improved Dropwise Dispensing Feature in the Microlit E-Burette
Burettes are used as a laboratory apparatus for titration where a solution of known concentration is used to determine the concentration of an unknown solution. In the process of titration, the completion of the operation is referred to as the end-point which is the precise point where the chemical reaction is complete.As the end-point is crucial while performing a titration experiment, it is important to use a burette which helps in obtaining a highly accurate end-point. Microlit E-Burette The Microlit E-Burette is...
Read More -
March 19, 2021
Top 10 Organizations Promoting Scientific Research in Africa
According to a report by the World Bank and Elsevier titled, A Decade of Development in Sub-Saharan African Science, Technology, Engineering and Mathematics Research, Sub-Saharan Africa has greatly increased both the quality and quantity of its research output from 2003 to 2012. The report also stated that Sub-Saharan Africa’s share of global research has increased from 0.44% to 0.72% during the decade examined. Over the years, with gradual investment and development in research, Africa has established itself as a global player in...
Read More -
March 8, 2021
Microlit E-Burette Empowers Ground Water Testing at The Central Ground Water Board (CGWB), Hyderabad
Team Microlit: Mr Satya, it’s a pleasure to converse with you today. Please tell us about your role at the CGWB, Hyderabad. Mr Satya Kumar: Sure, thank you so much. So, I’m currently working as a Scientist B in the Water Resources department at the CGWB, Hyderabad. Team Microlit: How long have you been associated with Microlit? Which Microlit products do you use? Mr Satya Kumar: We have been using Microlit products for the past 2 years. We mainly use...
Read More -
March 2, 2021
A Beginner’s Guide to Understanding Liquid Handling
What is Liquid Handling Liquid handling is the act of transferring reagents from one location to another, say from one apparatus to another, for testing purposes in a laboratory. Liquid handling might seem like an easy task at first but the precision with which it is done is strenuous & crucial. The samples used are often minute and as small as 1 microlitre but even these tiny quantities of reagents help researchers discover chemicals, detect diseases and so on. Liquid...
Read More -
February 4, 2021
The Central Ground Water Board, India: Supervising Groundwater Management & Conservation
The Central Ground Water Board (CGWB), established in the year 1970, is a national pinnacle organisation responsible for carrying out scientific surveys, exploration, development monitoring, management and regulation of the country’s vast groundwater resources for irrigation, drinking, domestic as well as industrial needs. Why was the CGWB established? The idea behind establishing the CGWB was to develop and disseminate technologies and to monitor and implement national policies for the scientific and sustainable development & management of India’s groundwater resources. This...
Read More -
January 25, 2021
Nurturing R&D at IIT Bombay
About IIT Bombay Founded in 1958, IIT Bombay is an internationally recognised institute in the field of engineering education and research. An outstanding faculty drive its research and academic programmes; the graduating students, too, are of an outstanding calibre. IIT Bombay has grown from strength to strength to emerge as one of the top technical universities in the world. Research at the Helm With a remarkable faculty coaching brilliant students, IIT Bombay is recognised across the globe for its contributions....
Read More -
December 18, 2020
Upgradation of Microlit E-Burette Software
The Food and Drug Administration (FDA) introduced Title 21 of the Code of Federal Regulations (CFR) in the year 1997. The FDA 21 CFR Part 11 lays special focus on regulating the use of electronic records and electronic signatures. This regulation is of importance to pharmaceutical, healthcare, and other biological & drug manufacturers. These clear and concise regulations were brought into action with the advancement of technology and when many companies shifted to digital record keeping. Though digital record keeping...
Read More -
November 27, 2020
A Comparative Study of the Auto Burette and the E-Burette
Typically, a burette is a graduated glass tube with a tap at one end which is commonly used to carry out a titration. Titration is a quantitative laboratory analysis where a solution of a known concentration (titrant) is used to determine the unknown concentration of a second solution (analyte) once the reaction reaches its end-point. Over time, the face of a traditional glass burette has changed to factor in ease of use and conduct titration in a more efficient manner....
Read More -
October 8, 2020
Filter Pipette Tips – Bringing Accuracy to Your Applications
Pipettes are widely used in a laboratory to measure small volumes of liquids while carrying out experiments. Researchers, very carefully, select the pipette that suits their needs, is ergonomic, and of high quality & performance. As a lot of thought is put into deciding the best model of the pipette, it is equally important to select the perfect tips for it. For the smooth functioning of a pipette, one must choose the tips that are chemically compatible and fit the...
Read More -
September 22, 2020
Dr. Prabhakar Kulkarni shares the story of establishing a start-up amidst the COVID-19 lockdown
Dr. Prabhakar Kulkarni is a seasoned molecular biologist with more than 16 years of experience. In 2018, he co-founded EdubioSkills, a startup focused on transforming the way biology is taught across schools, universities, research labs and diagnostic centres. During the COVID-19 lockdown, witnessing how our nation was brought to a standstill by the pandemic, Dr. Prabhakar was driven to do something about it. He decided to establish a company developing kits for COVID-19 testing amidst the lockdown. Though a gruelling...
Read More -
September 15, 2020
Calibration of Piston-operated Volumetric Instruments and How Microlit Undertakes it
Calibration is the process of comparing a device under test (DUT) with a calibration standard of known value. This standard could be a measurement device of a known value, a device that produces the quantity that needs to be measured or simply a physical measuring object. Calibration is typically performed to identify the error or verify the accuracy of the DUT. To gauge its significance, pause for a moment and look around – most of what you see was manufactured...
Read More -
August 6, 2020
Enabling Research at CellKraft Biotech, Bengaluru
About CellKraft Biotech, Bengaluru Founded on 4th April, 2018, CellKraft Biotech was established with the aim to form a state-of-the-art Stem cell Culture Lab and Advanced In-Vitro Molecular Diagnostics Facility. CellKraft Biotech is a multi-disciplinary contract research organization (CRO) and supports R&D activities in drug screening and assay biology, medicinal chemistry, in vitro and in vivo pharmacology and toxicology. The company’s in-house R&D programs are focused on the development of in vitro 3-D models of human tissue for testing of...
Read More -
July 31, 2020
Lessons the Scientific/Pharma Industry can Learn from COVID-19 & Past Pandemics
The COVID-19 pandemic has affected us in unimaginable ways. From our daily lives to our shopping and working styles, it has warped everything into what is being called the ‘new normal’. While the world attempts to get a grip on the pandemic, the latter continues to swell, claiming more than 620,000 lives, as per the latest WHO reports. As with every great outbreak, the COVID-19 response is being helmed by pharma, healthcare and biotech companies along with doctors and healthcare...
Read More -
July 23, 2020
Microlit RBO and Scitus facilitating research and development at Emmennar Pharma Pvt. Ltd.
About Emmennar Pharma Pvt. Ltd Established in the year 2005, Emmennar Pharma Pvt. Ltd. has the aim & drive to become the premier integrated pharmaceutical company in India. Its business focuses on contract manufacturing, custom synthesis, FTE research and the manufacturing & marketing of pharmaceutical products and services to clients across the globe. Its product portfolio includes a range of Active Pharmaceutical Ingredients (APIs), Fine Intermediates, Finished Drug Formulations (FDFs) and CRAMS. Emmennar Group was founded in 2005 by Mr....
Read More -
June 9, 2020
Dispense Hydrofluoric Acid Fearlessly with the New Microlit LentusTM
Bottle top dispensers are used in labs to conveniently dispense accurate volumes of acids, bases & other reagents. While they are easy to use and offer a safe way to deliver aliquots, traditional dispensers with glass barrels cannot be used to dispense highly corrosive chemicals like Hydrofluoric acid (HF) and other high-purity media as these may erode the inner surface of the equipment, forming cracks and leading to fatal mishaps. Addressing the market need for a Hydrofluoric acid dispenser While speaking to...
Read More -
April 17, 2020
Dr Bhattacharya, Assistant Professor, Department of Tea Science, University of North Bengal discusses Tea Science, Cytogenetics, Tea Link and more
Disclaimer: This discussion consists of personal views & experiences and does not represent the views of the organization as a whole. Team Microlit: Hello Dr Bhattacharya, it’s an honour for us to interview you. Can you please begin by telling us your association with the University of North Bengal? Dr Bhattacharya: Hello and thank you. I am currently the Assistant Professor, Department of Tea Science at the University of North Bengal. I have been associated with the university for 05 years now. Team Microlit: Your...
Read More -
April 10, 2020
Taking Care of Liquid Handling Instruments When Not in Use For Long
To keep your lab up and running, it is crucial to invest in quality and robust liquid handling instruments. Liquid handling instruments, automated or otherwise, reap accurate results during an experiment. These instruments help carry out critical tasks ranging from the discovery of drugs, adding enzymes to an assay plate and so on. Labs, the world over, use such instruments almost every day, working with the minutest reagent volumes, and assisting in accurately detecting diseases, preparing their vaccines, detecting chemicals,...
Read More -
April 7, 2020
Facilitating Testing at RBTC Blood Bank, NBMCH, West Bengal
About RBTC Blood Bank, NBMCH, West Bengal RBTC Blood Bank, North Bengal Medical College & Hospital (NBMCH), West Bengal is affiliated with the National Blood Transfusion Council (NBTC) – India’s apex body for matters pertaining to the operations of blood centres. The institute it serves – NBMCH – is the Largest Healthcare Facility in the North Bengal region of West Bengal, established in 1968 as the region’s First Medical College. In addition to providing tuition to MBBS students, it houses...
Read More -
March 23, 2020
5 Things Only a Lab Scientist Can Relate To
Scientists working in labs do not get the appreciation they deserve, as often as they should, though without them the world can’t function effectively. More often than not, non-scientists think that a lab is one of the most sterile and clean spaces one could ever work in, but is it easy to work with blood, human faeces, insects, and what not, every day? On the outside, working with interesting lab equipment looks fun, it actually is, but at the same time,...
Read More -
March 4, 2020
Mr K. Anil Prasad Reddy, Amneal Oncology Pvt. Ltd. talks about pharmaceutical microbiological analysis, and his role in testing and analysis.
Disclaimer: This discussion consists of personal views & experiences and does not represent the views of the organization as a whole. Team Microlit: Hello Mr Reddy, it’s an honour for us to interview you. Let’s start with your association with Amneal Oncology Pvt. Ltd. For how long have you been working with the company and in what capacity? Mr Reddy: Hello and thank you. I’ve been working with Amneal Oncology for 4.5 years. I’m an Assistant Manager at the Department of Microbiology. Team...
Read More -
February 11, 2020
How We Ensure High Levels of Precision in Our Lab Equipment
A lab cannot function effectively without precision and accuracy. Scientists and researchers always make it a point to measure reagents accurately in order to record the right readings and get precise results. Incorrect measurements make it difficult to get the desired outcome and the most common ways of making an error are either manual or an error in the lab instrument itself. When you use a lab instrument correctly, not only do you improve the degree of operational safety but also...
Read More -
January 15, 2020
Go Digital to Accelerate Your Efficiency
If we look at the decade that has gone by, digitalisation has become such an integral part of our life, that today, we can’t function effectively without it. From shopping apps to mobile banking, it has touched & transformed everything. Industries across the globe, too, have been positively influenced by it. The field of science is no exception. Digitalisation is already changing the way scientists & researchers are conducting their studies and how labs are operating. It’s making the studies...
Read More -
December 12, 2019
5 Things to Remember While Using Bottle Top Dispensers
A Bottle Top Dispenser (BTD) is a scientific apparatus that helps in dispensing chemical reagents (acids, bases, alkalis, etc). The process of dispensing, though can be carried out manually, poses multiple risks like spilling of chemicals, inaccurate measurements and even fatal lab accidents. In order to prevent such hazards and enhance lab safety, Bottle Top Dispensers are one of the best dispensing alternatives available to scientists. Benefits of Bottle Top Dispensers Accuracy & Precision: Bottle Top Dispensers are known to offer approximately 0.5%...
Read More -
Dr Boni Amin Laskar, Scientist – D, FBRC, Zoological Survey of India, discusses the identification & documentation of India’s biodiversity via DNA barcoding & more
Disclaimer: This discussion consists of personal views & experiences and does not represent the views of the organization as a whole. Team Microlit: Tell us a bit about your role & responsibilities. What significance does your institute – Freshwater Biology Regional Centre (FBRC) – hold for the Zoological Survey of India (ZSI)? What kind of research activities does FBRC commonly undertake? Dr Amin: I am a Scientist-D at FBRC, and have been assigned with the responsibility of DNA barcoding of aquatic animals, particularly...
Read More -
November 22, 2019
Trends that will Shape the Future of Pharmaceutical Drug Testing
Drug testing is a crucial step in the development of any drug. It is usually done in five phases, consuming a lot of time as well as resources, with a significant probability of not achieving a breakthrough in the end. The trends that are up and coming in the field focus on making the drug testing process more efficient and also, patient-centric. With the proliferation of advanced trends like in silico clinical trials, nanotechnology, implementing artificial intelligence (AI), machine learning,...
Read More -
November 15, 2019
Research Journey with Microlit Scitus : ACRHEM, University of Hyderabad
About University of Hyderabad Founded in 1974, University of Hyderabad (UoH) houses 5,000 students and 400 faculty members from various disciplines. It is one of the most prominent institutions in the country for higher studies. The university is renowned for its postgraduate courses as well as its excellence in research work. An Institute of Repute Honoured with numerous awards and distinguished certifications, the University of Hyderabad (UoH) is a member of the Association of Indian Universities (AIU) and the Association of Commonwealth Universities (ACU). It...
Read More -
November 12, 2019
What Goes Behind Making a High Precision Electronic Burette
Honoured with the prestigious India Design Mark, Microlit E-Burette is an advanced motor-operated burette, designed keeping ergonomics and intuitive handling in mind. It offers various sophisticated features and functionality like motor-controlled piston movement, a touch screen enabled control panel with graphical user interface (GUI) and three calibrated pre-set speeds to perform automated and therefore, highly accurate titrations. It’s natural to assume that a high precision electronic burette like Microlit E-burette must have had a fascinating development story behind it. Today, we will...
Read More -
October 15, 2019
Bidhan Chandra Krishi Viswavidyalaya (BCKV)
About BCKV Established in 1974, Bidhan Chandra Krishi Viswavidyalaya (BCKV) or Bidhan Chandra Agricultural University is nearing 50 years as a pioneer in Agricultural Education, Research and Extension. Ranked 75 among top Indian universities by the National Institutional Ranking Framework (NIRF) in 2018, the institute offers remarkable facilities for the study of Agriculture, Horticulture and Agricultural Engineering. Its broader aim is to conduct research in these streams and undertake educational and extension programmes in agriculture for the rural clientele, keeping...
Read More -
September 27, 2019
From path-breaking research to exploring uncharted areas, Prof. Rawat, Faculty, Delhi University, shares a piece of his exciting journey
Prof. Diwan S Rawat works as a Professor at the Department of Chemistry, University of Delhi (DU). His responsibilities include teaching MSc/PhD students and guiding PhD students. He is also a member of the Governing Body of the Delhi University affiliated colleges and the Chairman of the Governing Body of Deen Dayal Upadhyay College. Team Microlit: What inspired you to choose Chemistry? Prof Diwan S Rawat: I chose Chemistry because it is a fascinating subject – it poses a lot of challenges...
Read More -
September 17, 2019
The Fourth Agricultural Revolution will be Driven by the Heroes in the Labs
When agricultural practices begin to witness significant changes due to a marked shift in the methods of production – like adopting new techniques for better yield – an agricultural revolution is said to be underway. Such revolutions usually bear a momentous impact not only on the industry itself but also on society. Agricultural Revolutions So Far Till date, the world has witnessed three great agricultural revolutions – First: Adoption of modern agriculture, Second: Post World War I mechanisation, and, Third:...
Read More -
August 6, 2019
Dispensing Solvents with Air Displacement Micropipettes
A good scientist understands the significance of accuracy and precision in a lab; there’s no room for casual guesswork in his/her routine. Working with a variety of chemicals in a lab entails that you use them with great care and mindful consideration to obtain correct results, consistently. One of the most popular lab instruments is an air-displacement micropipette. It is used for various tasks like manual assay development, customary quality control, fully-automated high throughput screening campaigns, etc. It consists of a...
Read More -
July 18, 2019
Partner in Research for Indian Institute of Technology (IIT) Bombay
About IIT Bombay IIT Bombay was the second Indian Institute of Technology to be established in 1958. The institute is recognised worldwide as a leader in the field of engineering education and research. Reputed for the outstanding calibre of students graduating from its undergraduate and postgraduate programmes, the institute attracts the best students for its bachelor’s, master’s and doctoral programmes. An Institute Powered by Research Research and academic programmes at IIT Bombay are driven by outstanding faculty members, many of...
Read More -
July 16, 2019
10 Organizations Promoting Scientific Research in India
In the Union Budget 2019, the Indian government has announced a provision for increasing the funds allocated for scientific research. With the government’s support, the R&D sector of our country is all set to witness robust growth in the coming years. In 2017, we had moved up to the 60th position in the 10th edition of Global Innovation Index (GII) and will likely get into the list of the top 25 nations within the next 10 years. Let’s take a...
Read More -
June 27, 2019
Clean Energy, State of Science in India and More Discussions with Amey Wadawale, Technical Officer, BARC
Team Microlit: The pace of R&D in the field of chemistry has picked up speed in the last few years due to the new technologies which are coming in. What according to you has been a particularly noteworthy development? Amey Wadawale: The new applications of Graphene which are being discovered are quite interesting. Even though the research has been happening for a long time, the recent use cases of graphene in the areas of protective coating, photovoltaic technology etc. are promising....
Read More -
June 20, 2019
How Science has Evolved the Food and Beverage Industry in the Last Decade
The F&B sector has undergone multiple innovations in the last century. Be it mechanisation of farms, invention of Tetra packaging system, or even invention of superfoods, the scientific community is always experimenting with ways to make this industry more sustainable and progressive. As the years unfold, there have been some ground-breaking products and paradigm-shifting innovations that have changed consumption habits as well. The drive for innovation has risen from a number of reasons – environment friendly alternatives for farming, sustainable...
Read More -
April 23, 2019
CSIR-IITR Applauds MICROLIT ULTIMUS
The use of Bottle Top Dispensers (BTDs) is a common practice in laboratories across the world. Working with them requires careful handling and great precision. One of our most sought after products, the MICROLIT ULTIMUS is an advanced BTD that offers a highly sophisticated blend of features and functionality. Unlike formerly used BTDs, MICROLIT ULTIMUS is equipped with an award-winning technology, the Dual InletTMtechnology that enhances the instrument’s accuracy and precision. This technology is patented in India, Europe and the United States of...
Read More -
April 16, 2019
Hindustan Zinc Limited (Vedanta) praises MICROLIT E-BURETTE
Having made its mark at the international markets, MICROLIT E-BURETTE’s one of a kind, state-of-the-art ergonomic design is now making waves with our clients. As one of the most common lab instruments, burettes are heavily used in the healthcare and life-sciences industry worldwide. They are used for titrations, for measuring volumes, and for accurate dispensing of variables in analytical chemistry. MICROLIT E-BURETTE comes with cutting-edge technology that automates and enhances the precision of routine laboratory operations. It has been honoured...
Read More -
April 10, 2019
Our Innovations: Facilitating Efficient Laboratory Operations
At Microlit, innovating is a way of life. We are continually engaged in testing and improving the performance of our products under practical laboratory conditions, designing high precision liquid handling instruments infused with sophisticated technologies. Our research-oriented, data driven and customer centric team of scientists, engineers, IT specialists and technicians are passionate to deliver precision in everything they do. They help us blend the best performance parameters with the best user experience. It is due to their dedication and the...
Read More -
April 2, 2019
MICROLIT BEATUS: Facilitating Cannabis Testing in the US
The recent years have helped in fostering a positive take on the benefits of Marijuana and its medicinal properties. What once was considered a social taboo is now transforming into a rapidly-growing industry. With the help of advanced technology, several lab testing methods have provided us with a better understanding of the various uses of Medicinal Cannabis. Types of Cannabis Tests Scientists have found multiple ways of performing Cannabis Tests. Most laboratories that are working towards the comprehensive testing of...
Read More -
March 26, 2019
Adopting ISO 8655 to ensure accuracy and precision of piston-operated instruments
In the global marketplace, it is mandatory to have a robust checks and balances framework in place in order to maintain consistency and quality across industry players belonging to different nations. International standards help to keep a level playing field, and one such organization that fulfills this role is the International Organization for Standardization (ISO).ISO is an independent, non-governmental, international organization that develops standards to ensure the quality, safety, and efficiency of products, services, and systems.The ISO 8655 is a...
Read More -
March 19, 2019
Why Should Distributors Partner up with Microlit?
Our distributors are our partners. Working closely with them has taught us that their role, in smoothening the connection between us and the customers, can expedite response times, enhance our reach, and even create value-added packages that complement our product offerings.Distributors play the cog in the wheel, driving our brand forward. Take a read to find out how, if you’re a distributor, can you benefit from your association with us. a). We assure you good coverage in your territory. We don’t believe in...
Read More -
March 12, 2019
Industrial Applications of Bottle Top Dispensers
A Bottle Top Dispenser (BTD) is a scientific apparatus, designed to be attached onto the top of a bottle and help in dispensing reagents.A standard Bottle Top Dispenser (BTD) consists of a piston on a plunger. This piston is thrust down against a spring, and as the spring pushes the piston back into its original position, it draws with itself the reagent from the reservoir underneath it. When it is thrust down again, the plunger dispenses the drawn reagent out of the...
Read More -
March 5, 2019
Our CSR Initiatives: Growing Together to Go Farther
Corporate social responsibility or CSR constitutes the initiatives undertaken by an organization to encourage awareness about the impact of its business on the society. It can be further defined as the approach that facilitates sustainable development in the form of economic, social and environmental benefits for the organization’s stakeholders. CSR: Giving back to the society As a collective of vivid practices and definitions, companies the world over have developed different methods for implementing CSR initiatives in their own unique ways....
Read More -
February 26, 2019
Latest Developments in the Indian Pharmaceutical Industry
There’s so much happening in the pharmaceutical industry – from new researches being conducted to better technologies being made available – at a high growth pace that it’s easy to overlook stuff that might be really useful and beneficial. For your convenience, we have compiled some of the biggest recent developments from the Indian pharma segment. The Allied and Healthcare Professions Bill (2018) On 22 November 2018, The Allied and Healthcare Professions Bill for the regulation and standardization of education...
Read More -
February 12, 2019
MICROLIT LILPETS and Rapid Testing Kits
When scientists need to precisely deliver smaller volumes of a reagent, they use a pipette – a calibrated glass tube into which the reagent is drawn, held and then transferred. Glass and plastic pipettes have been the mainstays of biotechnology and life sciences laboratories for decades, and they can be relied upon to dispense volumes down to 0.1 ml. In many cases, scientists need to work with much smaller volumes of reagents, even getting down to 0.1 µl (one ten...
Read More -
February 5, 2019
Is Your Pipette’s Volume Range Right for Your Test?
Pipettes are one of the most essential and commonly used instruments in labs. They get the term media dispensers after their intrinsic use in transferring measured volumes of reagents. They are like the fuel cells of our labs, constantly and incessantly at work. In this blog post, we shall first learn about the types of pipettes and the distinctive features of each type. We shall then briefly take a look at some best dispensing practices that can help a lab...
Read More -
January 29, 2019
A Comparative Study of MICROLIT E-BURETTE, Glass Burettes, and Digital Burettes
A burette is a laboratory equipment commonly used to carry out a titration. A titration is a technique where a solution of a known concentration (titrant) is used to determine the unknown concentration of a second solution (analyte). A visual indicator usually signals the completion or the end-point of the experiment. Two types of burettes that are commonly available and widely used include glass burettes and digital burettes. Before we discuss how e-burettes or electronic burettes are better than both of these,...
Read More -
January 24, 2019
A Stepwise Guide to Selecting the Right Micropipette
All you need to take is one look at any lab and you will be surprised by the sheer variety of equipment that they use, both in number and in size. These types of equipment range from large ones occupying about half of the room to just a benchtop or even just a quarter of space.One such small but essential equipment is the micropipette which can be found on multiple counters within the same lab. In fact, it is safe...
Read More -
January 19, 2019
Our Exhibition Calendar for the Year 2019
We have come to the close of another prosperous year, and what a wonderful year it was. We travelled the world and showcased our innovations in some of the most remarkable exhibitions, events and trade fairs in 2018. We are truly humbled and honoured to be at the receiving end of appreciation from our industry peers and visiting guests. A big thank you to everyone who graced these events and gave encouraging feedback to our team members, in person. Read...
Read More -
January 15, 2019
The Importance of Testing Soil Quality
When untreated waste from oil refineries, thermal power plants, pesticide factories etc. is allowed to enter the environment, it affects every constituent of our biosphere – water, soil, air and all living organisms. And, only if we know the type and the quantity of these substances or contaminants, can we protect the environment and its inhabitants. What is Soil Testing? Soil testing refers to the process of carrying out a series of tests in order to determine the fertility and/or...
Read More -
January 9, 2019
THE YEAR THAT WAS
Bill Rodgers, the legendary long-distance runner and co-author of the book ‘Marathon Man’ once said, “To be a consistent winner means preparing not just one day, one month or even one year – but for a lifetime”. We have come a long way since our inception in 1991. Nurturing a passion for innovation and precision, MICROLIT is recognised as a respected and dependable brand in the healthcare and life sciences industry the world over. Today, our product range enjoys accreditation...
Read More -
January 4, 2019
Top 10 Tips for Pipetting Like a Pro
If you work in a laboratory, accurate pipetting is a crucial part of it. Without it, your experiments would not be reproducible, or the solutions you make would be inaccurate. Worse still, your readouts would be massively inaccurate and it would be meaningless to compare them with others. Pipettes or micropipettes may be precision instruments, but how you handle them determines their accuracy, like how you maintain your pipettes, practice your techniques and understand their inner workings. And, once you actually master...
Read More -
India Design Mark – A Trustworthy Indicator of Excellence
India Design Mark was initiated in 2012 by India Design Council (IDC) in cooperation with Japan Institute of Design Promotion (JDP). It is a design standard, a symbol, which recognizes good design. It further symbolizes excellence in form, function, quality, safety, sustainability and innovation and communicates that the product is usable, durable, aesthetically appealing & socially responsible. Three of our products are recognized by the India Design Mark. Designed with ergonomics and intuitive handling in mind, they exhibit excellent chemical...
Read More -
January 22, 2019
Client success story: Microlit Beatus – Bottle Top Dispenser with Recirculation ValveTM Technology
A bottle top dispenser plays an important role when it comes to dispensing a specified amount of reagent/chemical to carry out experiments that require high precision liquid handling. Mostly used in every industry, from Pharmaceutical and Healthcare to Life Sciences and Biotechnology, bottle top dispensers are known for their great aid in facilitating efficient liquid handling operations.At Microlit, we offer a diverse range of bottle top dispensers – from the relatively simple and cost-efficient ones like Microlit Scitus with...
Read More -
December 17, 2018
Client Success Story: Microlit E-Burette
A burette is one of the most popular and widely used instruments in the healthcare and life-sciences industry. It is used in analytical chemistry for accurate dispensing of variables, and for measuring the volume of a liquid, especially that of a reagent in a titration.We offer an all-in-one, award-winning solution to automate and enhance the precision of routine laboratory operations that require burettes. The MICROLIT E-BURETTE, honoured by India Design Mark, is a burette with motor-controlled piston movement and...
Read More -
December 10, 2018
Water Testing: An evolving practice for safe water consumption
We live in the era of industrialization where every minute witness a new discovery and every second a new invention. But, in order for these discoveries and inventions to take form, human beings often end up polluting crucial resources like air and water to such an extent that they become unfit for use or consumption by any other living organism. It’s not a surprise that today we are facing a grim scarcity of quality water for personal use and for...
Read More -
December 3, 2018
6 Factors to Consider Before Buying Liquid Handling Instruments
Buying the right liquid handling instruments for carrying out routine laboratory experiments becomes quite a task when you don’t do your research properly. In order to turn your one-time purchase of such instruments into a long-term investment that delivers precision, accuracy and long-lasting efficiency, here are 6 important factors that one should keep in mind before buying them. 1.Price Price plays an important role in the purchase of liquid handling instruments. However, more than the price, what one really needs to...
Read More -
November 28, 2018
Types of solvents and industrial equipment that handle them the best
One of the most frequently talked about chemical substances across the globe are solvents. With an array of uses in the industrial as well as the domestic sector, solvents can simply be defined as substances that dissolve a solute to form a solution. What are the different types of solvents?Solvents are most commonly found to be liquid in nature; however, there are gases and supercritical solvents known to man that also qualify as solvents.Solvents are of two basic types – organic...
Read More -
November 8, 2018
Titration 101: Titration Techniques, Method, Calculation Formulae and Digital Burettes
Time taken to read the blog: 7 minutes One of the most common techniques of quantitative analysis in the healthcare and life sciences industry the world over is titration. It is a routine laboratory task that is typically taught while studying at a school or a university or while training, and finds application in a number of industries including F&B, pharma, water treatment, among many more. The following narrative discusses titrations, and elaborates their manifold uses and benefits. What is...
Read More -
July 31, 2018
Microlit drives ‘Genvision 2018’ at IIT-Bombay
The Department of Biosciences and Bioengineering at the Indian Institute of Technology (IIT) -Bombay hosts its technical fest- Genvision in the first quarter of every year to showcase the latest developments in the field of Biosciences and Bioengineering as well as to create and instil an exciting environment in the field for the students by bringing in eminent guests and speakers for the different events in the fest. This year, the event took place on March 24th, 2018 and we...
Read More -
June 25, 2018
How digital burettes help to perform highly precise and accurate titration
Do you work in a laboratory? If yes, do you often find yourself using electronic equipment while carrying out different experiments? One of the most popular and widely used electronic instruments in the healthcare and life-sciences industry today is the digital burette. Often used as an advanced alternative to the manual burette for carrying out titrations, it offers a number of advantages as compared to the latter. What is titration? Titration is a technique where a solution of a known...
Read More -
June 8, 2018
MICROLIT ULTIMUS Bottle Top Dispenser- an innovative product that can help enhance your laboratory experience
Microlit is proud to present the most advanced, state-of-the-art dispenser in the world: ULTIMUS. With this Bottle Top Dispenser, Microlit’s R&D has solved the biggest problem of users: Re-filling the bottle and rinsing the instrument WITHOUT the need to DISMOUNT it from the bottle. ULTIMUS is the First Ever Dispenser which offers four modes of dispensing: Dilution, Rinsing, Dual Liquid Handling and Re-circulation in a single unit. This introduces a new technology to the World. Currently, the ordinary Bottle-Top Dispensers available globally have a single inlet only...
Read More -
May 23, 2018
Why Should You Use Bottle Top Dispensers?
Bottle Top Dispensers can facilitate a broad range of applications and increase safety, speed and reliability of daily lab work. Choosing a bottle top dispenser saves time, work and protects you and your samples. Let’s see how. Routine chemical handling in labs Working in labs demand extreme care and caution, every single day. A lab professional must rightly follow everything that he/she has learned from his/her superiors and practice precaution, especially while dealing with strong chemicals as enlisted below: ...
Read More -
May 15, 2018
Lucknow Based Product IP Firm Microlit Launches New Brand Identity
Lucknow, April 6, 2018: MICROLIT, a product IP firm headquartered in Lucknow, unveiled its new brand identity today. The firm manufactures high precision liquid handling instruments for leading biotechnology and pharmaceutical laboratories of the world. As a part of the launch, it revealed its new logo, product range, packaging and tagline, ‘Experience Precision’, in a move to reinforce its promise of accuracy and reliability in real laboratory environments. The new branding will be reflected across every major touch point including...
Read More